Htc rom upgrade

[darkdsk]

hey guy sorry if i've entered this forum in the wrong place but here goes.


im currently trying to upgrade my HTC hero's Ram and it tells me to do 3 things,

• Disable Standby
• Disable Hibernation
• Disable phone screen lock

Now im new to the HTC hero (which is a brilliant phone btw) and i just dont know how to do these 3 things,

please help

Thanks

[notxel21]

3. Installation Instructions
Before you proceed the ROM Update Utility (RUU), please confirm the following items:
(1) This software upgrade is a newer version than what is currently installed on your phone. If it is the same version and your phone is operating normally, there is no need to reinstall the software.
To check what version is installed on your phone, press Home > Menu > Settings > About phone > Build number, and note the Build number.
(2) HTC Sync has been installed on your PC. HTC Sync can be found on the MicroSD card that was shipped with your phone. You can also download and install HTC Sync at www.htc.com/www/support/
(3) Your phone is connected to your PC using a USB cable. The PC must recognize your phone.You will see a sync icon in the taskbar once the phone has been connected.
(4) Standby and hibernation mode on your PC has been disabled.
(5) Close all running applications on the PC.
(6) The Screen unlock pattern has been disabled, press Home > Menu > Settings > Security and uncheck Require pattern
(7) Make sure that the battery level of the phone is at least 30% (at least 3 green blocks). To check the battery level, tap Home > Menu > Settings > About phone > Status > Battery level.
(8) Once the RUU is downloaded, launch the application on your PC and follow the instructions on screen.

Warning!
* Please note that this upgrade will erase any data stored on the phone. We recommend that you back up all your data before performing this upgrade.
* This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
* The update will take up to 10 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the phone from the PC, or press any buttons until the process has been completed.

How to Disable Hibernation

1) Ensure that you have administrative privileges or else you can't disable hibernation.
2) Go to Start and type cmd in the Search box.
3) Once you see the list of searches, right-click on Command Prompt then proceed in clicking Run as Administrator.
4) Click on Continue as soon as you are User Account Control prompts you.
5) Type “powercfg.exe/hibernate off” and press Enter.
6) To exit the Command Prompt, simply type Exit and then press the Enter key.

How to disable Standby
Launch the Control Panel
If you are in Classic View, find the Power Options Icon and Double Click. If you are In Category View, click the Performance And Maintenance and then click on Power Options.
Under the Power Schemes Tab, set the Standby and/or Hibernate Options to Never.
Click Apply/Ok and you’re done.

[darkdsk]

thanks for that, but i cant uncheck Require pattern, what should i do to that?

[notxel21]

thanks for that, but i cant uncheck Require pattern, what should i do to that?

If you're not using a lock pattern don't worry about it. or just uncheck using the lock pattern.

[darkdsk]

okay thanks a lot :-)

[Arslan]

yupeeeeeeeeeeeeeeeeeeeeeeee

[Arslan]

yyyyyaaaaaahhhhhhhhooooooo

[Arslan]

i want this upgrade

[Arslan]

this is amazing peace of work

[Arslan]

i m enjoying it........................