Quote:
Originally Posted by eyeini
Duh! Great idea....it fixes any gripe at all I have with the phone. Problem is, I don't have that invisible sheild thing. Have any other suggestions for materials to use?
I've tried:
Double sided tape-too thick
Masking tape-too thin and very difficult to get a couple layers in.
Also, what was your method for sticking that stuff in?
Again, thx for the creativity
Rc
|
As far as any other material u cud try slicing double sided tape in half but that wudnt fix the tilted screen. the reason i chose to use the remaining pieces of the shield was because the material is both thin and compressible but also grippy. when you slide open the key board its weak enough to let slide but strong enough to hold the screen straight when fully open. as far as my method, for the lower right insert, slide the phone halfway open and just try to shove it in there with something thin and somewhat stiff (ie: small piece of paper folded over 2-3 times) . For the top fully slide open the keyboard and very very very lightly pry the screen up enough to slide in the insert and position it. Hope that helps.
Thanks for the good ratings. were all dealing with this together. Its the least i could do for AC.